Split The Bill
All posts
Roommate Expenses

Forward Bills by Email to Split Apartment Expenses

Forward bills by email to split apartment expenses: filter Gmail or Outlook, and $120 among three people comes to $40 each.

Split The Bill7 min read

Split a receipt in seconds, no sign-up needed.

Scan one free
Forward Bills by Email to Split Apartment Expenses

To forward bills by email and split expenses without sending screenshots by hand every month, all you need is a filter that sends only the electricity, water and internet emails to a single place. With $120 of bills among three people, each person pays $40.

Forwarding bills by email means setting up your inbox (Gmail or Outlook) so that the notices from your utilities go out on their own to another address. You set it up once and, roughly, it takes a few minutes.

Key takeaways

  • Automate only what you split equally (electricity, water, gas, internet). Whatever changes from one month to the next, check by hand.
  • Filter by sender, don't forward the whole inbox: Gmail forwards everything by default and the filter only acts on new emails, so this month's bill gets forwarded by hand.
  • Turning an email into a bill in Split The Bill requires Pro ($7/month or $70/year). From a Free account, the forwarded email isn't processed.
  • Divide the total among the people and leave the spare cent with one person: $120.10 split three ways is $40.04, $40.03 and $40.03.

Which apartment bills get split equally, and which don't?

Electricity, water, gas and internet are usually split equally, because all the occupants use those services continuously, according to CaixaBank. That same bill is the starting point for splitting electricity and water costs among roommates until the balance is zero.

Rule of thumb: whatever gets split the same every month goes into automatic forwarding. Whatever depends on the month, like uneven usage, stays out and you check it by hand.

Step 1: choose the bills and the sender of each one

Note down each shared bill with two details: who receives the email and which address it comes from. It's received by whoever is listed as the account holder, which is why that person is the one who sets up the forwarding. The exact sender is in the “From” field of your latest email from each utility.

BillWho receives itSender (“From”)
ElectricityAccount holderLook at your latest email
WaterAccount holderLook at your latest email
InternetAccount holderLook at your latest email

Whatever your utility company, don't copy addresses from the internet: open your own bill emails and see who sends them, and use that address in the “From” field of the filter.

Step 2: forward bills by email from Gmail with a filter

In Gmail, forwarding has two parts: adding and verifying the destination address, and creating a filter that forwards only the senders you choose. Careful, because automatic forwarding sends all your messages by default and a new filter only affects emails that arrive afterward.

Add and verify the destination address

  1. Open Gmail on your computer, with the account that receives the bills.
  2. At the top right, click Settings and then See all settings.
  3. Go to the Forwarding and POP/IMAP tab (or Forwarding).
  4. In the Forwarding section, click Add a forwarding address and type the destination address.
  5. Confirm the verification link that Google sends to that address. Until then you won't be able to forward anything.

Create the filter that forwards only those senders

General automatic forwarding stays off and the filter does the work. That's how Gmail chooses which messages go out, following Google's steps for forwarding with filters.

  1. In the search box at the top, click Show search options.
  2. In “From”, type the sender from step 1.
  3. Click Search and check that only the bills you expect show up.
  4. At the bottom, click Create filter and check Forward it to.
  5. Choose the forwarding address you already verified and click Create filter.

If a sender also sends you promotions, add a word like “bill” in “Has the words”.

Step 3: forward bills from Outlook with a mail rule

In the new Outlook, a rule with a sender condition and a “Forward to” action does the same job as the Gmail filter. If you leave only “Apply to all messages”, you'll forward the whole inbox, so always add a sender condition.

  1. At the top, open Settings and go to Mail, then Rules.
  2. Select Add new rule and give it a name (for example, “Electricity bill”).
  3. Add the sender condition with the address from step 1.
  4. Add the action Forward to (or Forward as attachment) and type the destination address.
  5. Select Save.

There's one catch: when someone replies to a forwarded message, the reply goes to the address it was forwarded from, not to the original sender. If the destination is your Split The Bill account, don't expect a reply to reach the company.

Step 4: turn the email into a bill in Split The Bill

Split The Bill's email-to-bill feature turns a receipt forwarded to your personal address into a bill, no photo needed. It's a Pro feature, at $7/month or $70/year, and an email forwarded from a Free account isn't processed. It takes four steps, in this order:

  1. Get your forwarding address. With Pro, open Settings → Email-to-bill and copy your personal address. It's linked to your account and nobody else can create bills with it.
  2. Approve the senders you'll forward from. Add your own email, and any other inbox you use, to the trusted senders list, up to 20 addresses. Email from any other sender is held and not processed.
  3. Forward the receipt. Forward the bill email to your address. If you set up the Gmail filter or the Outlook rule, they do it on their own.
  4. Review the bill like any other. The app reads the attachment or the body of the email, extracts the merchant and the total, and creates the bill. Open it, check the figures and split it like a photographed receipt.

The calculation is deterministic: the AI only reads the email and the code does the math. Now, the limit: a Free bill can be split among a maximum of 3 people, and with four or more you need Pro. On Free you can also add bills by hand or by photo, but without forwarding.

Step 5: add up the totals, split, and set a settlement day

Add up the bill totals, divide by the number of people and leave the spare cent with one person.

BillAmount
Electricity$58.40
Water$21.80
Internet$39.90
Total$120.10

120.10 ÷ 3 = 40.0333. Rounded to the cent, that leaves two shares of $40.03 and one of $40.04.

PersonShare
Account holder (first person, gets the extra cent)$40.04
Roommate A$40.03
Roommate B$40.03
Total$120.10

Since the account holder fronted the $120.10, the two roommates owe them $80.06 between them ($40.03 each). In Split The Bill, in an equal split, the first person absorbs the rounding difference.

Set the settlement day just once, for when all three bills have already arrived (for example, the 5th of each month). Each roommate sees their share and a Pay button with the amount already filled in. If they pay you through a shared link, they don't need to install anything or create an account. Save your bank account details or a payment app as your payout method and the money goes straight from person to person.

Forwarding creates bills, it doesn't move money

Forwarding by email doesn't move money between people: Split The Bill doesn't hold, move or process any payment. And a newsletter, a plain-text update or an email without a total or merchant doesn't generate a bill.

That's why it's best to filter by bill sender and not forward the whole inbox.

Other tools also accept forwarded bills: the Payhawk Mailbox automates sending the expense documents you receive, and Wise gives you a unique address in your profile for forwarding bills and receipts.

Frequently asked questions

What if the internet is in a roommate's name?

They have to set up the filter in their own inbox, because only the person who receives those emails can see them. You calculate their share of the split the same way as the others.

Should I send my roommates the PDF of the bill?

Yes, it's the most transparent option: whoever pays their share can check the total on the original. In Outlook, the “Forward as attachment” action does this automatically.

Where do I start today?

Open the latest email for your electricity bill, copy the address from the “From” field and use it to create the Gmail filter or the Outlook rule. All that's left is to register your forwarding address in Split The Bill.

Try it free — no signup

Scan a receipt now

Upload a photo of a receipt and the AI lists the items, total, tax and category. Up to 3 scans, no card, no account.

🔒 No signup needed🎯 AI-detected categories

Try Split The Bill — free

10 receipt-scanned bills/month, recurring expenses, multi-currency, and settle-up via Venmo / PayPal / Revolut.

Create a free account